[Slava]

К примеру из описания к одному из образов

Цитата: Install Notes------------------------------------------------------------------------------- The system is setup by default to boot in Verbose mode. You can change this yourself if you want in /Library/Preferences/SystemConfiguration/com.apple.Boot.plist. I included BBEdit with the applications, it can edit the file in place with correct permissions. During the DVD bootup if your stuck at "waiting for root device" I am sorry your hardware is probably not supported. You can try changing some options in your BIOS, maybe you get lucky. If you get error com.apple.boot.plist make sure to change AHCI in the BIOS, alternately your burn could be bad. Try again at a lower speed or with a different program. If you have an AMD system please check the box for AMD-System-Fix to aplly the patches needed for Leopard to work!! AHCI works, but you are limited to two drives, turn this off if you have more than 2 drives you need to access. Video Driver support has been updated. Improved NVidia, ATI and GMA950 graphics support with updated kexts. There are some new options here so take a look. For ATI I added new installers for 2600PRO/2600XT/3850/3870/3870X2. Now GMA950 has an option that will install Vanilla 10.5.2 kexts and Natit The EFI bootloader automatically detects and installs for MBR/GUID thanks to Dense, it may have specific problems for Bad-Axe 2 systems, though so far there have been no reports of this. Please select your IDE/SATA chipset during install.(One and only one!)Added support for some Marvell PATA chipsets, for those ICH9 users that requested it. Choose the ICHx fixed IOATAFamily.kext. Default selection for kernel is Netkas improved 9.2.0. If you select a Vanilla kernel please uncheck Netkas kernel. If during the inital account creation your system locks up, try disabling your Network card. You can also visit osx86leo4all.wikidot.com for other directions. If you installed Video drivers during install and your system freezes before the desktop loads,boot into single user mode with the bootflag -s at the Darwin prompt. Type:/sbin/fsck -fy/sbin/mount -uw /./RemoveVideoFollow the prompt to choose type of card.Then type exit to continue booting. If after you boot to the desktop you get an error about an Extension not being properly installed open the Application I included called Extensions-Repair to correct this automatically.