![]() |
#1 |
Супер-Модератор
|
![]() ![]() Вышедшая несколько дней назад свежая версия утилиты Core Temp наверняка порадует тех пользователей, которые любят следить за жизнедеятельностью (и жизнеспособностью) аппаратных компонентов своей системы. Основная задача Core Temp - отслеживание температуры ядра центрального процессора (одного ядра или нескольких - в зависимости от конфигурации вашей системы). Поддерживаются все процессоры AMD K8, начиная с ранних степпингов SH-C0 (правда, в настоящее время для ревизий BH-G1 и DH-G1 выдаётся некорректная температура). Также поддерживаются все процессоры Intel линейки "Core" - Core Duo/Solo, Core 2 Duo и т.д. (процессоры Pentium 4/D не поддерживаются). Утилита "повисает" в системном трее в виде значка с отображением текущей температуры ядра. При этом ведётся журнал событий (в обычном формате TXT), что бывает полезно при анализе ситуации после запуска полноэкранных приложений. Распространяется Core Temp на бесплатной основе, запускается под операционными системами Windows 2000, XP, 2003 и Vista (как 32-bit, так и 64-bit версий). Официальный сайт: http://www.alcpu.com/CoreTemp/
__________________
× Если вы нашли ошибку в моём сообщении, выделите её мышкой и нажмите Alt-F4 × × Twitter, LastFm, SCC, What.cd, Tapochek.net × Последний раз редактировалось Slava; 04.04.2011 в 09:33. |
![]() ![]() |
![]() ![]() |
![]() |
#2 | ||||||||||||
Боец
|
![]() ![]() ![]()
Последний раз редактировалось Slava; 06.03.2009 в 19:38. |
||||||||||||
![]() ![]() |
![]() ![]() |
Благодарности: 3 |
![]() |
#3 |
Администратор
|
![]() ![]() Change log
Version 0.99.8.0 - 3rd October, 2010 - New: Completely new settings dialog, much clearer and easier to use. - New: Added Hibernation to Overheat protection options. - Fix: Mobile Intel Core2 Quad processor recognition issues. - Fix: Pentium Dual-Core E6000 series model detection was incorrect. - Update: TjMax adjusted to 100c (Intel's specs) for 400 and 500 series Atom processors. Version 0.99.7.10 - 1st September, 2010 - New: Enable overheat protection to execute a command every time an overheating occurs or just once. - New: TjMax for AMD 10H and 11H family processors (K10/K10.5/Puma - older Turions) - Fix: Several mobile Intel processor recognition issues. - Fix: Mobile AMD processor recognition issues. - Fix: Problem with Settings window throwing errors about Scheduled tasks if "Start with Windows" was not checked. - Fix: Core Temp may crash on systems when switching between power supplies (wall/battery) or exiting sleep/hibernation mode. - Fix: TCaseMax calculation for socket 939 AMD processors. - Update: Shared memory applications and AMD Phenom derivatives will now show temperature for all of the cores. - Update: Core Temp will remember proper screen position on multiple displays, when the 1st display is on the right. Version 0.99.7.7 - 29th July, 2010 - New: Core Temp FAQ is now available online, see About Core Temp dialog. - New: System tray icons for CPU speed and CPU load - see System Tray setup under Options. - New: Support for the latest mobile AMD processors. - Fix: Multiple "Fail" messages when the computer exits sleep or plugged into/unplugged from power (laptops). - Fix: Several mobile Intel processor recognition issues. - Fix: When disabling Windows 7 Taskbar feature with Cycle mode, icons still continue to cycle. - Fix: Windows 7 Taskbar settings UI bug. - Update: "Start with Windows" function in Vista and 7 now works on a per-user basis. - Update: Change the time and date layout of the log file name to YYYY-MM-DD HH-MM-SS. - Update: All of the readings logged are now numeric only. - Update: In single instance mode, the previous instance will be brought to the screen. - Known issue: Core Temp may stop responding for a period of time or completely lockup on some systems when switching between power supplies (wall/battery) or exiting sleep/hibernation mode. Version 0.99.7.3 - 5th July, 2010 - New: "Start Core Temp with Windows" feature on Windows Vista and 7. - Fix: Taking a screenshot would not capture the whole window in Vista/7 with aero mode. - Fix: Windows 7 taskbar Cycle mode only shows up after the first interval has elapsed. - Fix: Overheating protection UI bug. - Fix: The Mini-mode menu was not checked when Mini-mode was activated. - Fix: Corrected the placement and size of the load label on Phenom based processors. - Fix: Order of appearance of the system tray icons in Windows 7. - Update: The appropriate G15 menu is now checked depending on the status of the G15 plug-in. - Update: Added support for 12 core processors to temperature offset adjustment window. Version 0.99.7.0 - 26th June, 2010 - New: Implemented Windows 7 taskbar button features. (Under the Options menu) - New: Clock modulation detection for Intel processors. - New: Proper support the Phenom II X6 and Athlon L100 series. - New: Support for the E3000 Celeron series. - New: Displays the processor's manufacturing process. (Lithography) - Fix: Intel frequency detection. - Fix: Frequency doesn't update after exiting from Sleep or Hibernation. (Intel) - Fix: Reading and logging intervals in Settings can't be changed. - Fix: Minor Intel processor recognition issues. - Fix: On some systems the System Information window would flood the screen with errors. - Fix: G15 plugin restarts after resuming from sleep even if it was previously disabled from the menu. - Fix: Overheating protection on AMD processors bug. - Update: Rearranged the main GUI and added new information. - Update: Added missing Intel Socket names. Version 0.99.6.1 - 8th May, 2010 - Fix: Overheating protection. - Fix: Incorrect detection of some Intel and AMD processors. - Fix: Layout problems with AMD Phenom series and newer processors. - Known issues: Intel processor speed detection displays extremely high numbers. Version 0.99.6.0 - 26th April, 2010 - New: Support for new and upcoming Intel and AMD processors. - New: Better recognition of AMD dual/tri core unlocked CPUs. - New: Optional 24 hour display on G15 LCD. - Fix: Platform field blank for newer AMD CPUs. - Fix: Some K8 CPUs were unknown or recognized incorrectly. - Fix: Overheat protection "Activate at specified temperature" problems were fixed. - Fix: Overheat detection does not show a Balloon Tip when user specified temperature value is set. - Fix: Temperature displays a negative value when core temperature reaches over TjMax (Intel). - Fix: Intel W3500 series Xeons recognized with Core i7 model numbers (ie W3520 shown as Xeon 920) - Fix: In certain cases Core 2 Duo T5500 was recognized as a T5450. - Fix: G15 LCD display is no longer always-on-top after coming out of sleep or hibernation. - Fix: G15 won't display 0.0000v in case VID readings are not supported by the CPU. - Fix: In some cases, at Windows startup systemtray icons would not appear. - Update: Windows XP SP2 or higher is now required. - Update: Completely new processor frequency detection algorithm. (for Core 2 generation and newer only) - Update: Remove "APICID" from main window as it has very little use. Version 0.99.5.27 - 5th August, 2009 - Fix: Crash on AMD 45nm processors. Version 0.99.5.26 - 3rd August, 2009 - Fix: Incorrect clock speeds reported on some systems. - Fix: At startup Core Temp shows 0 (?) or 21 (?) on AMD K8 series. - Fix: Turion MK series recognition was wrong. - Fix: Properly detect Atom and Core i7 engineering samples. - Fix: Tri-Core AMD CPUs incorrectly shown as having only 2 cores and 2 threads in 64bit Core Temp binary. - Fix: System tray text was off center. - Fix: Penryn (mobile Core 2) processors reported as having 85C TjMax instead of 90C. - Fix: Settings window would open centered, and sometimes out of the desktop area. - Fix: System tray icon very small in Windows 2000/XP/2003. - Fix: AMD Athlon X2 4x50e series detected as 3x50e. - Fix: Using a negative offset on AMD systems results in "42949672xx°C" being displayed. - Fix: Add support for Mobile Athlon 64 X2 TK-xx series and Turion 64 MK-xx series. - Fix: Workaround added for when Core Temp fails to find supported CPUs on Phenom based systems. - Fix: PROCHOT signal from Intel CPUs was not picked up correctly. - Fix: Core Temp would start out of the desktop area, and the main Window couldn't be seen/accessed. - Fix: False overheating warning on AMD systems. - Fix: False readings of over 200C° on AMD systems. - Fix: High/low temperatures would be reversed when "Show distance to TjMax" was enabled. - Fix: Clicking "Defaults" button in settings would enable logging when it should be disabled by default. - Fix: 23xx and 83xx series AMD Opterons recognized as 83xx and 23xx respectively. - Fix: System tray icons appear incorrectly on AMD K10 and newer CPUs. - Fix: "Show highest temp of each CPU" systemtray icon configuration sometimes reports duplicate readings. - Fix: G15 applet did not work after resuming from Sleep/Suspend. - New: Completely new code for processor speed detection. - New: A comprehensive processor information window (F3 or Tools --> System information). - New: Thermal protection mechanism. (Look at Options menu, changed from 0.99.5.20 beta) - New: Support for the latest AMD and Intel CPUs. - New: Mini mode for GUI. (Double click anywhere to switch between modes) - New: Per core temperature offset adjustment. (Look at Options menu) - New: Screenshots are now taken in the lossless but very compact PNG format. - New: User defined text colors for main Window. (Options --> Settings) - New: Show high/low temperatures. (Press F6 or the Tools menu to reset values) - New: On/Off switch for G15 applet in Tools menu. - New: Running several instances of Core Temp is now possible (enable in Settings). - Update: Temp turns Orange when temperature is over TControl, and Red when CPU is thottling/critical. - Update: Reorganized menu. - Update: TjMax for mobile Atom processors changed to 90C. - Update: "Lion" codename for AMD Turion was changed to "Griffin". - Update: Completely dropped support for older Windows NT OS, Windows XP or up is required. (For Windows 2000: download GDIPlus.dll here http://www.dll-files.com/dllindex/dl....shtml?gdiplus)
__________________
Раздел "Меломан" | Новости, Концерты, Музыка. Правила раздела Меломан & Правила Battle Forum. Последний раз редактировалось Slava; 04.04.2011 в 09:33. Причина: ftp |
![]() ![]() |
![]() ![]() |
![]() |
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
|
|
![]() |
||||
Тема | Автор | Раздел | Ответов | Последнее сообщение |
Vuze (Azureus)* | a2z | Интернет и сети | 49 | 26.11.2016 16:41 |
BitComet* | a2z | Интернет и сети | 9 | 28.01.2011 20:55 |
RivaTuner* | a2z | Система | 69 | 24.08.2009 10:13 |
Core FTP | a2z | Интернет и сети | 0 | 19.04.2009 22:46 |
Dual Core Optimizer* | Slava | Система | 9 | 06.08.2008 16:37 |